Features & Options breakdown

Support This Project

XBMCCustomregis Features:

Now uses "Ctrl-Alt-Enter" to start XBMC/Kodi and exceute the GSB Script, also monitor extend option use the hash " # " button on your remote! It send CTRL+F11 " you can not use two different scripts at the same time because all of them use the key "CTRL+F11" for screen extention. [when you run the setup it will allow you to choose only one option] for example the option "For Windows 7" already includes all the required setup files including the GSB Script by default so no need to select the GSB script again. See below on what the GSB script now includes.

Also Make sure to Install Autohotkey if you have not already done so, to allow xbmccustomregis to run properly. During installation it allows you to choose 64-bit or 32-bit, choose the right one depending on your operating system, its recommended to have autohotkey installed before running xbmccustomregis setup file.

 

Important Note: If you want to use the screen extention feature then you must extend to Screen #2 first then followed by starting XBMC/Kodi. Then all you have to do is configure XBMC/Kodi to start on screen #2. By going to

Settings_> System_>Video output_> Display Mode , then select "Full Screen #2" this way XBMC/Kodi will remeber to always start on screen 2. But of course you need to have screen 2 activated before starting XBMC/Kodi. "NOTE: One of the optins below have this completely automated if you want to use it see below." Now close XBMC/Kodi and you should be ready to use any of the scripts below, this step has to be done for the first time, only once!

XBMCCustomregis can now detect 64bit or 32bit Windows systems and will install the right scripts and reg files, all you have to do is select the right option that you need.

 

All the options below is available in one small installer xbmccustomregis.v.2.80.01


1- GSB script v2.39:
I- Simple screen toggle from screen #1 to screen #2 and back to screen #1 etc..
II- GSB feature, Green start button start XBMC/Kodi, refocus XBMC/Kodi etc..
III- SmartFocus©, always keep XBMC/Kodi on focus and on top of all other windows, can be disabled/enabled by press of a button etc...

All the current GSB script features including simple toggling support from Screen #1 to Screen #2 and back to screen #1, this feature is executed every time you press CTRL+F11 or the hash button " # " on your remote, then pressing the Green Start Button will start XBMC/Kodi in the correct screen. Also includes the all new SmartFocus© feature.

IInstall latest xbmccustomregis to benefit from the latest scripts. This script is a vailable by default when you select Windiws 7 or windows 8 options from the installer, also available for selection as a standalone without XBMCCustomregis full registry install.


2- Multi-Monitor Auto XBMC/Kodi Start standalone script v1.18:
This is can be used as a standalone script, this feature is executed every time you press CTRL+F11 or the hash button " # " on your remote.

It supports simple toggling from Screen#1 to Screen #2, it will wait till screen #2 is activated then it will start XBMC/Kodi in screen #2 [make sure you configure XBMC/Kodi to start in screen #2 first otherwise it will start in screen #1] and when you press CTRL+F11 or the Star button " * " on your remote, XBMC/Kodi will close, the script will wait for XBMC/Kodi to close then it will switch back to screen #1.

This script has no GSB functions, this script can be simply used by people who do not wish to use the GSB script i.e. Harmony remotes etc... If you want the GSB scripts as well, so all in one script then look below at the SuperGSB Script.


3- SmartFocus© v2.02.301:
This is one of the latest and greatest options of XBMCCustomregis to date, it is available when you install XBMCCustomregis for windows by default or if you want it as a stand alone its availabe as an option from the installer.

Its like no other script at the moment, it can be triggered by
pressing CTRL+F12 or pressing the "Teletext" button on your MCE remote,

"please note that I can not cater for every one's remote out there, so just map one of your remote buttons to send CTRL+F12 or if you have a Teletext button then it will be mapped automatically for you"

Finally you can benefit from this option if you like to "Disable [Use a fullscreen window rather than true fullscreen]" as it will boost your PC/XBMC/Kodi performace instantly.

When pressing the "Teletext button or CTRL+F12" the script will be activated, it will always keep XBMC/Kodi on top of all windows and XBMCCustomregis will inform you by voice that "SmartFocus© has been activated" this will allow you to know if its active or not since if you press the button again it will disable it and will tell you that "SmartFocus© has been De-activated".

This will come in handy if you want to use windows for something else while XBMC/Kodi is on or if you want to shutdown your windows and not sure if SmartFocus© is activated or not and want to disable it for example or for any other reason. Although the script is intelligent enough to detect if XBMC/Kodi is on or off or switch off automatically when windows is shutdown, but its a nice touch from XBMCCustomregis as always.

The Beauty of XBMCCustomregis that it allows you to control everything from your remote and no need to access the PC to change any settings.


4- SuperGSB Script v3.46:

I- Advanced screen toggle from screen #1 to screen #2 and back to screen #1 with XBMC/Kodi auto start/close etc..
II- GSB feature, Green start button start XBMC/Kodi, refocus XBMC/Kodi etc..
III- SmartFocus©, always keep XBMC/Kodi on focus and on top of all other windows, can be disabled/enabled by press of a buton etc...

Is exactly the same as the GSB Scripts v2.38 above but it also includes the auto XBMC/Kodi start feature when using multi monitors. So when pressing the "hash # buttton on the remote or CTRL+F11" to extend the screen, the script will wait till screen 2 is active then start XBMC/Kodi [again if you have not configured XBMC/Kodi to start on screen 2 then it will start in screen 1 XBMC/Kodi must be configured to start on screen 2 first].

If you press "hash # buttton on the remote or CTRL+F11" XBMC/Kodi will automatically shutdown and the script wil wait for XBMC/Kodi to close then it will close Screen #2 and go back to Screen #1 all will be done by a press of a button, very useful for wife or the kids. All will be done by a press of a button,

 

The simplest, smartest and fastest pre-customised setup ever for your RC6 MCE remote!

Enjoy :-)